7 Most Common Kubota RTV 500 Problems With Solutions

Frank Boyd

Kubota RTV 500 is among the robust and befitting plowing vehicles. The vehicle has undergone different modifications over the years. Its excellent performance is satisfactory for owners worldwide.

We are going to discuss Kubota RTV 500 from all the dimensions in this post.

Kubota RTV Problems

Our focus will be on the major Kubota RTV 500 problems. It’s important for you to consider the downsides of the RTV 500. So that your offroading hauls would be safe from these issues. We have divided these problems into different sections for easy understanding.

So let’s dive deeper for the real discussion!

Typical Kubota RTV 500 Problems!

  • Faulty Transmission
  • Hydraulic System Overheats
  • Defective Hydrostatic Transmission Pump
  • Transmission Fluid Often Leaks
  • Cold Hydraulic System Issues
  • Defective Brakes
  • Detached Driving Shaft

We are going to have a detailed discussion of these problems. Don’t worry, you can solve these issues with authentic information and guidance.

1. Faulty Transmission

Some of the drivers experienced a faulty transmission due to the slippage. This is a common problem with this model that needs suitable rectification. The transmission slippage can reduce the performance of the RTV 500.

Also, it can bring it closer to further damage. You can detect transmission slippage with the help of a testing tool. Some owners even heard a transmission slip when they were on a move.

Solution:

It may be that the solenoids attached to the gears are damaged. In this case, an immediate replacement can be the solution. Sometimes if the solenoids break then a mechanic would help you with the issue.

2. Hydraulic System Overheats

In some cases, we have seen that the owners complained about fluid contamination. This results in an increase in the temperature and eventually leads to overheating of the hydraulic system.

When there are abrupt leaks in the hydraulic system. These leaks can be the root cause of overheating of the hydraulic system. The digital display would indicate to you when this problem occurs with your RTV 500.

You can get access to the error codes with the help of a testing tool.

Solution:

Make sure to use a good-quality transmission fluid to avoid this issue. Also, consult a professional mechanic to reduce the intensity of this problem as soon as possible.

3. Troublesome Hydrostatic Transmission Pump

There is no doubt about the reliability of the Hydrostatic Transmission Pump of the Kubota RTV 500. However, in some cases, it can lose its performance. This can be due to frequent driving.

The pump cannot produce enough pressure due to mechanical abrasion. This results in poor gear shifting if not addressed in time. It’s easy to detect this problem. You will encounter difficult gear shifting.

There have been drivers that experienced full failure of the gear of RTV 500.

Solution:

Replace the transmission pump as soon as you experience this problem. Also, seek mechanical help by completely discussing your experience with the pump as well. These solutions are viable to narrow down this problem with the least effort.

4. Transmission Fluid Often Leaks

The configuration of the Kubota RTV 500 is sturdy in terms of leakage. If you notice some leakages then it can be mainly due to the overheating of the transmission system.

Overheating makes the vehicle vulnerable to such leakage problems later. The error code for this problem is P0842. The range of error codes related to this fluid problem includes several other error codes similar to this one.

The insufficient pressure towards the sensors shows that there is a leakage problem that needs your attention immediately.

Solution:

First off check out where you noticed the leakage problem. After that block the leakage. This is the most common solution to narrow down this problem. Sometimes the gaskets and seals can be damaged leading to similar fluid leaks. So replacing is another possible solution.

rtv 500 problems

5. Cold Hydraulic System Issues

Sometimes the RTV 500’s hydraulic system can become cold. If not unchecked it can make your entire vehicle prone to further mechanical abrasion. The hydraulic fluid changes to a thick texture due to this issue.

Due to high viscosity, the fluid struggles to reach the pump in a normal way. If this cycle does not break, the system fails to discharge a sufficient amount of heat. Sometimes warming up the vehicle would rectify the problem.

You will see an indication of the display if this problem occurs when you are on a go.

Solution:

Anticoagulants are useful to maintain the consistency of the fluid. If this does not narrow down the problem then a mechanic would help you with this.

6. Defective Brakes

The braking system of this model can be a nuisance as well. With full power coming through the brakes. The vehicle cannot go forward. This issue has no radicle reason as of now.

Some drivers thought that it would be due to some technical faults. While others blamed the speed lever damage for the defective brakes. However, when the Kubota RTV 500 was evaluated as per the reports.

There were no logical reasons to be found in this aspect.

Solution:

If you notice something fishy with the brakes then immediately consult a seasoned mechanic before the braking system further damages your vehicle.

7. Detached Driving Shaft

Due to perpetual usage, the driving shaft can come off its assembly in some cases. You might hear a slight noise when the shaft becomes undetached. When the U-joint becomes defective. It would lead to a bad driving shaft.

The repairing price of this problem can vary as per the dealer you are associated with. However, it’s important to address this issue as early as possible to keep the performance of the driving shaft intact in the long run.

Solution:

Replace the U-joint to maintain the driving shaft. You can either do it on your own or a mechanic would replace the joint feasibly.

Kubota RTV 500: Honest Reviews

We are going to have a look at honest reviews from the owners of the Kubota RTV 500’s owners. The weight of the entire vehicle ranges up to 1400 pounds with a full fuel tank.

The weight of the vehicle does not come in way of its natural performance for the drivers. The loading capacity of this vehicle is totally uninterrupted no matter how much weight you would like to lift with it.

However, there are some complaints about its power generation. Some owners fixed the faulty steering on a temporary basis. Using a silicone spray or lithium grease would narrow down the problem too but it showed good results for only 5-6 months.

The drivers also found the wheels to be abnormally functioning as well. The pace of the Kubota RTV 500 can become slow on different types of terrains. The drivers have used this model for plowing the snow. Since its configuration goes well with sturdy and heavy-duty working.

All in all the Kubota RTV 500 can easily handle the challenges of plowing activities.

FAQS

What is the easiest way to detect Kubota RTV Problems?

Using a testing tool like OBD-II is an easy way to detect the problems with this vehicle. Such testing tools help you with the proper fixation of the issues in the long run. Another way is to keep a record of your RTV 500’s performance. In case you notice any unusual behavior then visiting a mechanic and taking care of its servicing are some other possible solutions.

How to keep Kubota RTV 500 from mechanical problems?

To keep it simple, taking care of your vehicle is the best solution. Regular checkups will increase the life length of the transmission as well. If you don’t heed the maintenance of transmission then it might result in extreme damage to the other important components of the system. Proper servicing would keep your Kubota RTV 500 from mechanical problems.

What is the functionality of the Kubota RTV 500’s transmission?

The company calls its transmission a variable hydro. It means that the transmission of Kubota RTV works like a hydrostatic tractor transmission. It’s different from the transmission of a UTV. Another difference in its transmission comes in the RPMs which are not identical to the standard transmission.

How long does Kubota RTV serve you?

When proper maintenance is executed. The Kubota RTV 500 offers about 5500 hours on the run. Some drivers have reported about its service that enhanced when they took complete care of their Kubota RTV 500. The range approaches 10,000 hours.

Summing It Up

Kubota RTV 500 is a beast for heavy-duty activities. Since the enhancements in its modifications are enough to beat the hardships you might face when offroading.

Also, it’s an ergonomic machine when it comes to plowing snow. We have described the Kubota RTV 500 in detail for you. So that you can have a general idea about its downsides.

Make sure to heed the problems of this model. There have been cases when the drivers were totally clueless about these issues. Later, the issues cost them a fortune. Since these prevailed the vehicle and its performance.

Leading to huge repair costs for the owners. It’s easy to save yourself from all this fuss. You can dig deeper into these problems through our discussions and viable fixes.

OffRoadCares is on a mission to make mechanical understanding easier for you. This would help you with the feasible fixation of these problems at home.

Just grab some tools and start addressing such problems with Kubota RTV 500 on your own!!!

How useful was this post?

Click on a trophy to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Help us improve it for you and others.

Tell us how we can improve this post? Any and all details appreciated.

Total
0
Shares
Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts